Industrieventilatoren sind geeignet für eine effiziente Entlüftung größerer Hallen, Lagerräume oder Werkstätten. Der Einbau erfolgt direkt in die Wand. Die robusten Ventilatoren sind erhältlich in den Durchmessergrößen von 200mm - 800mm.
Serie RAB TURBO
|Produktname||Model||EAN||Verfügbarkeit||Preis ohne MWSt.||Preis mit MWSt.||In den Warenkorb|
Combined supply and exhaust ventilation system for various premises where high air capacity at relatively low system resistance is required. The fans can be used for direct air exhaust or pressurization in smoke ventilation systems. They are suitable for outdoor wall mounting.
The fan casing and the impeller are made of steel with a polymeric coating. The fan terminal box is equipped with a pull cord for remote connection.
The impellers are powered by two-, four- or six-pole, single or three phase asynchronous motors with external rotor and built-in thermal overheating protection depending on the model. Ball bearings in the motor ensure a long service life, designed for at least 40 000 hours. Motor protection rating IP 44.
Both smooth or step speed control is performed by means of a thyristor or autotransformer controller. Several fans can be connected to one controller if the total power and operating current do not exceed the rated controller values.
The fan is installed on the wall surface by means of a square mounting plate. The fan is powered through an external remote terminal box. Power supply and installation should be performed in compliance with the manual and wiring diagram on the terminal box.
CUSTOMS CODE: 84145925